Frequency Response:
Main Output, no load,
0.2 dB @ 10 Hz
3 dB @ 160 kHz
Noise:
Measured at Main Output, unweighted, 22Hz-22kHz, Terminated 150 Ohms.
With gain at unity
better than 100 dBu.
With gain at 66 dB
better than 62 dBu
Equivalent Input Noise
better than 128 dBu
High Pass Filters:
Continuously variable swept frequency from 20 Hz to 250 Hz.
Slope:
12 dB/Octave
Gain:
Unity to +66dB in 6 dB steps, Trim continuously adjustable from 6dB to +6dB
Buss Output:
Output is designed to feed a Buss-mix Amplifier (ie. Buss inputs on 5043) at the internal system level of -2.5 dBu.
Maximum Output Level:
Maximum output from 20 Hz to 40 kHz is +25 dBu.
Mute:
Mutes Main Output only.
Total Harmonic Distortion and Noise:
@ 1kHz, +20 dBu output:
Main Output:
Better than 0.001%
@ 20Hz, +20 dBu output:
Main Output:
Better than 0.002%
Silk Engaged:
Better than 0.2% Second harmonic
Equalization:
Low Shelving EQ:
+/- 15dB boost or cut. Corner frequency 160Hz
High Shelving EQ:
+/- 15dB boost or cut. Corner frequency 8kHz 16kHz switch selectable
Mid Peak EQ:
+/- 15dB boost or cut. Continously variable frequency,
80 to 800Hz or 800Hz to 8000Hz switchable
Phantom Power:
+48 Volts DC +/- 1%
Power requirements:
Voltage range:
9 to 18 Volts DC

Current consumption:

@ 9VDC Current is

910 mA typical: Power = 11.7W

@ 12VDC Current is

670 mA typical: Power = 12.0 watts

@ 15VDC Current is

530 mA typical: Power = 12.0 watts

@ 18VDC Current is

450 mA typical: Power = 11.7 watts
Connector:
5.5mm X 2.1mm DC jack, Center Positive

Where to Buy | Support

Olark Livehelp